|
|
|
|
|
For Visor Prism |
| |
|
|
|
 |
Step: 1
Using the included screwdriver remove the six screw from the case |
 |
Step: 2
Using your fingers, pry open the case starting with open of the bottom corners of the PDA, the back of the case should easily unsnap from rest of the PDA. |
 |
Step: 3
Once the case is separated, the back of the case will still be attached to the rest of the motherboard by a speaker wire. Carefully turn over the back of the case, giving you access to the PDA battery. |
 |
Step: 4
With the back of the case removed, the battery can be moved freely, giving your better access to the battery connector. Disconnect the battery connector by gently pulling on the black and red power cable.
please pay attention to have original orientation (power cable towards the top of the PDA). Connect the power cable of the new battery by positioning the socket on the motherboard, pushing it in.
Snap on the cover and put back the single screw.
Your new battery will need a minimum of three hours of charging before first use. |
|
|
|
|