|
|
|
|
|
For Visor Edge |
| |
|
|
|
 |
Step: 1
Using the included screwdriver remove the six screw from the case. |
 |
Step: 2
Using the screws removed, your should be able to easily lift the back case cover from the PDA. Using your finger, pry the battery free its compartment. The battery should still be attached by its power cable. |
 |
Step: 3
Gently pull on the battery power cable to disconnect if from the power socket. You can now remove the battery. |
 |
Step: 4
Please pay attention to have the original orientation (power cable towards the top of the PDA). Connect the power cable of the new battery by positioning it within the socket on the motherboard, pushing it in with the tip of a screwdriver. Apply the new battery within the battery compartment.
please pay attention to have original orientation (power cable towards the top of the PDA). Connect the power cable of the new battery by positioning the socket on the motherboard, pushing it in.
Snap on the cover and put back the single screw.
Your new battery will need a minimum of three hours of charging before first use. |
|
|
|
|