|
|
|
|
|
For BlackBerry RIM R957 |
| |
|
|
|
 |
Step: 1
Using the included T-5 screwdriver remove the four screw from the case. Remove the back cover by carefully unsnapping it from the PDA starting at the bottom. |
 |
Step: 2
Within the back cover removed we have easy access to the battery. Disconnect the battery power cable by carefully pulling upward on the orange power connector. |
 |
Step: 3
Within the back cover removed, we now have to easy access to the battery. Using the tip of the included flathead screwdriver, carefully unglue the battery from its compartment. Warning...the glue can be very adhesive making it difficult to separate the battery from the case, so please use caution. The battery can then be removed from the PDA.
Please ay attention to have the original orientation (power cable towards the bottom of the PDA). Connect the power cable of the new battery by positioning it over the stocked on the motherboard, pushing it in. Apply the new battery to the original glue spots within the battery compartment.
Snap on the cover and put back the single screw.
Your new battery will need a minimum of three hours of charging before first use. |
|
|
|
|