|
|
|
|
|
For Sony PEG-T415 |
| |
|
|
|
 |
Step: 1
Using a screwdriver, remove the four screws from the battery compartment. |
 |
Step: 2
Once the screws are removed, pull the front compartment cover towards the bottom of the Clie and it should detach from the case. |
 |
Step: 3
Using your finger or the screwdriver, unglue the old battery from the case. The battery should now only be attached by its black and red power cable. |
 |
Step: 4
Disconnect the power cable connector by gently pulling on the ribbon cable. The connector should pull free allowing you to remove the battery from the Clie. |
 |
Step: 5
To insert the new battery, line-up the power cable connector with the power socket. Use the tip of a screwdriver to push the connector into the socket. Apply the new battery on the case within the guide bracket. The battery should stick to the original glue spots. Please pay attention to have the original orientation (connector towards the op of the Clie).
Snap on the battery compartment cover and put back the four screws,
Your new battery will need a minimum of three hours of charging before first use. |
|
|
|
|