|
|
|
|
|
For Samsung Nexio S160 |
| |
|
|
|
 |
Step: 1
Using the included screwdriver remove the eight screw from the back case cover. Carefully remove the battery the back case cover from the device. |
 |
Step: 2
Disconnect the battery power cable from the power connector using your finger or the tip of a screwdriver. Carefully pull upwards on the power cable and it should unsnap from the connector. You can now remove the battery from the PDA... it should be attached to the case with a very small amount of glue. |
 |
Step: 3
Install the new battery by sliding it into the compartment. The battery should stick to the original glue spots. Please pay attention to have the original battery orientation. Reattach the power cable by positioning it over the socket on the motherboard, pushing it in. Reapply the back case cover and put eight screws.
Your new battery will need a minimum of three hours of charging before first use. |
|
|
|
|